Catch-22 on the 'no network' issue windows then would not be able to download anything during install (kown fixes and such to make the install go better) yes download while running OS X and place on FAT USB During Windows there is the option - usually for disk drives - F6 - to load drivers From Device Manager you can try Update driver which you can also browse and point to the folder with Apple driver or the ones you downloaded. You should though with Lion 10.7.3 run or rerun Boot Camp Assistant and download the current full set of support software. It isn't clear to me either. Boot Camp Assistant - save the drivers to USB etc (partition also, and start the install) After Windows is installed either stop from doing more Windows updates or wait until done, is up to you. THEN take the USB and run setup for Apple drivers.

Some devices like autio have to get Cirrus (or RealTek) AFTER installing Apple drivers. I find 'boot camp' to be used and over used to refer to too many things. Windows on Mac Drivers partition tool download apple drivers control panel in Windows to change default OS, brightness and other items you run Windows. Hence, you really can't install software in Boot Camp. You aren't running Boot Camp. You have a number of Apple serivdes running in/under Windows though like Apple Timeservices, keyboard and others.

It is normal to have some devices and wifi/internet is a 'sometimes' even with Apple driver. In which you might try to locate and install those individually. Whether it is best to allow Windows to do all its updates first, or interrupt and install Apple's, whether that even makes any difference. You can always check in Programs control panel and repair-reinstal, or reinstall with admin or elevated privileges. Or compatibility mode. I wish there were 4 subsections: mini have their own unique needs, iMac definitely and macbook like, and one for oothers (mac pro tower) Or, that every Mac-Mini owner would add keyword 'mini' and you can find the last 10 threads related to and posted by others.

360 Controller Driver Mac

Catch-22 on the 'no network' issue windows then would not be able to download anything during install (kown fixes and such to make the install go better) yes download while running OS X and place on FAT USB During Windows there is the option - usually for disk drives - F6 - to load drivers From Device Manager you can try Update driver which you can also browse and point to the folder with Apple driver or the ones you downloaded. You should though with Lion 10.7.3 run or rerun Boot Camp Assistant and download the current full set of support software. K.kyle, Lion uses Boot Camp 4, so the 3.x updates won't work. The only way to get the drivers is to wait for the download through Boot Camp. OR, here's a direct link.

П™‚ solo9999, you mentioned that ' is it possible that the drivers are on the USB stick that BootCamp created?' If Boot Camp had you create a disk or USB drive, then yes, those are your 'Support Files'. Pop that USB drive in, and run the 'Setup' application. I did the Support Files install BEFORE allowing Windows to do its updates, and I haven't had any problems.

Apple Footer. This site contains user submitted content, comments and opinions and is for informational purposes only.

Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.

After pc crash we have re installed from the disc which came with the PC. However although laptop now works we have no internet connection. Looking at system it shows yellow exclamation marks against Ethernet controller,SM Bus controller,Universal Serial Bus (USB controller and USB 2.0-CRW. I think this means that we need the drivers.However cannot seem to get these from internet and cannot checking sites as no internet on the said laptop. Any help to obtain these and advice on what to do would be most appreciated.

Laptop with Windows 7. You will have to download the drivers on another computer and transfer them via a flash drive or other removable media. The Samsung driver site is located at the following address: You'll need the Ethernet controller driver. The SM bus drivers and USB will probably be installed with the chipset driver package.

Make sure you get the correct driver for your version of Windows. I know it's Windows 7, but 64-bit and 32-bit drivers are different. winipcfg ASCII Question, Get an ANSI message edited by winipcfg.